Kitchen Cabinets for the Fridge

A refrigerator wall cabinet is a deeper-than-standard wall cabinet designed to sit directly above the fridge. At 24 inches deep, it aligns with the front of most refrigerators rather than sitting several inches behind a standard 12-inch wall cabinet, so the finished run looks intentional rather than mismatched. It adds usable storage in a space that would otherwise go to waste.

A refrigerator end panel is a finished panel that wraps the exposed side of the refrigerator surround, covering raw cabinet edges or the gap between the fridge and an adjacent wall or run. If your fridge sits at the end of a run with a visible side, an end panel gives that side the same finish as your cabinet doors, making the whole installation look built-in. If both sides are hidden, you may not need one at all.

The end panel kit includes L-brackets along with the panel itself, giving you the hardware needed to secure the panel without hunting for separate fasteners. The panel in the kit is 1/2 inch thick and ships at 1-1/2 inches wide overall with the brackets, so it is a more complete, ready-to-install solution compared to ordering a bare panel alone.

Start by measuring your refrigerator's width, then match a wall cabinet to that opening. Also measure the gap between the top of the fridge and the ceiling, then subtract the cabinet height from that number to confirm you have enough clearance to open the cabinet doors. Keep in mind that most refrigerators need a small amount of clearance above them for ventilation, so check the appliance manual before finalizing cabinet height.

Yes. The refrigerator wall cabinets and end panels are available across every door style and finish carried by Everything Cabinets, including Shaker, Raised Panel, and other profiles in painted and stained options. Order them from the same collection as your other cabinets and the color and door style will be a consistent match throughout the kitchen.

Assembly requires no special tools or skills. The cabinets ship flat-packed as RTA (Ready To Assemble) units, and step-by-step assembly videos are available on the Everything Cabinets website. Once assembled, the cabinets are engineered and tested to hold up to 500 lbs, so the finished result is a solid, durable installation. If you are in the Citrus County area of Florida, Everything Cabinets also offers local installation services.